• Category
  • Diameter
    4-24 µm
  • Width Range
    9-20 µm
  • Striae in 10 µm
    17-25
  • Synonyms
    Melosira italica (Ehrenb.) Kütz.
  • Reported As
    Aulacoseira crenulata (Thwaites 1848)

Identification

Description

Frustules are cylindrical and are connected face-to-face to form filamentous colonies. Valves are 4-24 µm in diameter, with a mantle height of 9-20 µm. The ratio of the mantle height to valve diameter usually ranges from 0.7 to 5. The mantle has almost straight sides, and the valve face is flat with slightly convex margins. The straight or slightly sinuous rows of mantle areolae are inclined to the left (sinistrorse) or almost parallel to the pervalvar axis, 17-25 rows in 10 µm. The mantle areolae vary in shape from circular to slit-like. Spines are large, spatulate or anvil-shaped and originate from two to four costae. One or more pervalvar rows of areolae terminate at the base of the spine. Separation valves are rare and have thinner, pointed spines than linking valves. The number of rimoportulae is most often two, but may be one or more per valve. Externally, the rimoportula openings are not distinguishable from areolae. The ringleiste is solid, shallow, and thick. Resting spores are often observed and produced as semi-endogenous pairs. Spore frustules superficially resemble those of vegetative cells, but conspicuously lack visible spines, have thicker cell walls, may have a convex valve face, and often have incomplete rows of mantle areolae. Not all populations of A. italica appear to form resting spores; spores are especially common in fossil deposits and in populations from shallow polymictic lakes.

There has long been confusion surrounding the identity of Aulacoseira italica. Crawford et al. (2003) studied type material of both A. italica (Gallionella italica) and A. crenulata, confirmed that they represented the same taxon, and that A. italica was the earlier and correct name. Note that in the type material, the rimoportulae (illustrated in Crawford et al. 2003) are positioned along a stria about 4-5 areolae from the ringleiste and appear internally as long, straight tubes integral with the valve wall. In material from Florida, rimoportulae appear internally as short, sessile processes. The spore forms have also been separately named as Melosira laevis and M. semilaevis (Van Heurck 1882)

Original Description

Sie unterscheidet sich durch einen gekerbten Cirkelrand von G. distans, könnte aber, da ich nur wenige, nicht völlif deutliche, Exemplare sah, zum Jugendzustand der G. varians gehören. – Grösse 1/384 Linie.

  • Basionym
    Gaillonella italica
  • Author
    Ehrenb. 1838
  • Length Range
    6 µm

Original Images

Orig Ill  Auital
Orig Descr  Auital

Cite This Page

Potapova, M., English, J., Edlund, M. (2010). Aulacoseira italica. In Diatoms of North America. Retrieved December 12, 2024, from https://diatoms.org/species/45236/aulacoseira_italica

Responses

The 15 response plots show an environmental variable (x axis) against the relative abundance (y axis) of Aulacoseira italica from all the stream reaches where it was present. Note that the relative abundance scale is the same on each plot. Explanation of each environmental variable and units are as follows:

ELEVATION = stream reach elevation (meters)
STRAHLER = distribution plot of the Strahler Stream Order
SLOPE = stream reach gradient (degrees)
W1_HALL = an index that is a measure of streamside (riparian) human activity that ranges from 0 - 10, with a value of 0 indicating of minimal disturbance to a value of 10 indicating severe disturbance.
PHSTVL = pH measured in a sealed syringe sample (pH units)
log_COND = log concentration of specific conductivity (µS/cm)
log_PTL = log concentration of total phosphorus (µg/L)
log_NO3 = log concentration of nitrate (µeq/L)
log_DOC = log concentration of dissolved organic carbon (mg/L)
log_SIO2 = log concentration of silicon (mg/L)
log_NA = log concentration of sodium (µeq/L)
log_HCO3 = log concentration of the bicarbonate ion (µeq/L)
EMBED = percent of the stream substrate that is embedded by sand and fine sediment
log_TURBIDITY = log of turbidity, a measure of cloudiness of water, in nephelometric turbidity units (NTU).
DISTOT = an index of total human disturbance in the watershed that ranges from 1 - 100, with a value of 0 indicating of minimal disturbance to a value of 100 indicating severe disturbance.

Diatoms of North America is running a fundraising campaign to keep the servers in operation. We need you to reach our $25,000 fundraising goal.

If you use and appreciate DONA, make your DONAtion today.

For the Gift Designation, type "diatom" in the search box and select "Diatom Lab Research Fund". This is the designated fund for diatoms.org.